Click Here To Return To Top Of This Blog
Today I finished the project, at least as far as I can until the Leica 35mm negative carrier arrives. It will fit in the slot at the end of the enlarger head. Also, I have a largish bellows, actually a large format camera sun shield. It will take up the space between the camera and the bellows to cut down on reflections. Also, the pipe will be cut down to approximately where the head is shown, plus another 4 inches for adjustment.
To give a short summation.
The pipe holder was moved from the center of the stand to the corner.
The lens carrier was removed from the head assembly.
The head was turned 90 degrees.
A mount for the two focus rails was made from an old 2″x4″.
The rails were joined and mounted.
Adjustments:
The head assembly can move up and down and side to side on the pipe.
The focusing rails allow for side to side plus forward and back.
The camera can be swiveled on the tripod mount.
That finishes up the project except for focusing and trying it out.
